Please use the search on page option from your web browser to search for keywords on this page
From: Dennis Gibson [email protected]
Date: 14 Jan 2003
Time: 15:53:35
Remote Name: 150.203.2.85
G'day,
Upon close investigation, I discovered that my '24 door "locks" are far from original. Can anyone please suppy either a detailed picture, tracing or sketch of the arm? My ones are 5mm thick soft brass (easily bent by hand). I suspect that the originals would have been nickel plated hard brass. Does the end knob rotate or is it fixed? I assume that the pivot was a brass stud on the 1/2 round mounting plate. Mine were 3/8" bolts drilled right through to the outside of the door!
Thanks,
DG