From: H.W.Jones [email protected]
Date: 9/05/99
Time: 22:46:56
Remote Name: 147.188.55.9
I have a 1930 salloon with the same roof construction, sometime ago it has been renewed by someone, and im not convinced by the profile, but i think the construction method is correct. It simply consists of loads of (what i remember, as the car is at home) 3/8 x 1 inch strps running the length of the car, with a gap of about 1,1/2 to 2 inches between them. There is also a wooden crossmember roughly in the middle made up of three parts , the two curved ends and a straitish bit running in between, all screwed together. Hope this helps.