From: Fyrth Crosse - [email protected]
Date: 21/05/00
Time: 7:25:09
Remote Name: 195.7.224.50
The master cylinder probably has two mounting holes at the top. Have two right angle brackets fabricated, slots on one side to take bolts to locate the master cylinder and to allow for adjustment, holes on the other side to bolt onto the top of the chassis after suitably drilling. The actuating arm for the master cylinder normally has a yoke at one end which can be bolted to the standard A7 brake pedal, an inch or two above it's location on the steering box. All is a bit or trial and error but this is all I did many years ago on my 65 and it is still OK! Hope this helps.