From: Steve Jones PWA7C - sjones [email protected]
Date: 25 Feb 2001
Time: 01:01:14
Remote Name: 205.188.197.26
DAVID: I have used the method set out by Chris Gould that Dave Wortley talks about once for truing a wheel. It worked well but the wheel then distorted when it went for powder coating, no doubt due to the heat. I had to do it again which upset the finish slightly but when done it was fine and continues on my Chummy to this day. On a different subject, I am not sure about the wisdom of an MGB distributor on Dave Wortley's Ulster. As I remember, that car is fast enough!!