From: Bill Sheehan [email protected]
Date: 24 Oct 2002
Time: 21:45:11
Remote Name: 203.29.131.3
Antony - I haven't the time to download Bruce's drawings (I remember it took yonks when I first did it some time ago), but my notes on subject (taken from several actual chassis many years ago) may be of help. On vintage chassis, (yours probably same), bolthole centres for box are 3 1/4", front hole = 2" c to c from rear engine-mount hole. Correct distance from edge of rail can be ascertained by placing box in position and marking holes top and side. (Important if you have a modified box rather than a genuine sportsbox). Large side hole is 9/16" and centre is 3/4" from top of rail. If using hour-glass box, front hole centre is 9/16" down, rear 5/8" down, but latter would be different if you're angling column back. Of help? Good luck. Bill