From: Bill Sheehan [email protected]
Date: 25 Nov 2002
Time: 21:00:54
Remote Name: 203.29.131.3
Dennis - a bit like asking over the telephone how long's a piece of string , but a few answers : Steel staunchion is "D" shaped, 13/16" wide, thickest part 13/32", painted, straight except a lumpy rounded section (side view) adjacent to where frame tube fits at top, lamp bracket part of (welded to) staunchion, flat (3/16" thick) with 11/16" hole for 5/8" shaft on lamp, would need to send you a template. Bottom of flange to top of screen-frame tube = 20", plus hood-mounting "knob" on top. There's an "L" shaped rod near top of pillar to which sidescreen hooks - it's short-leg centreline is 1 1/4" down from centreline of screen top tube. Centreline of Short leg of rod sticks out 5/16" from pillar. Rod is 1/4" diam.,total length 1 3/8". Long leg points up, parallel to and on centreline of pillar . Bottom of lower w-screen frame to bottom of lamp bracket = 5". From btm. of brckt up to first mounting hole 1", 2nd hole @ 3 3/4" - but you can verify this with the holes in your scuttle. Would have suggested you check with Mr. Walker in Canberra, but recall his frame is '25, slightly different. Good luck, Bill