From: Dennis Gibson
Date: 29 Nov 2002
Time: 09:35:22
Remote Name: 150.203.2.85
One (at least) issue to resolve is the angle of the scuttle at the point of connection of the pillar. If the pillar flat part of the "D" is straight all the way down, then the body has to be normal to the windscreen at the bolts. This area is a bit butchered on my body, but it appears that the vertical wooden frame behind this area is parallel to the flange on the end of the dashboard, which is not angled, so looking down on the area, parallel to the pillar (RH) the section is:
\ Scuttle
| D
\
\ Door
(With a bit of luck this will look OK in print)
True?
Thanks,
DG